IBM PC 300PL Types 6862, Installation Manual

Page: 60 / 112

Chapter 5. Working with Internal Drives
This chapter provides information and instructions for installing and removing
internal drives.
When you are installing an internal drive, it is important to note which drive types
and sizes you can install in each bay. Also, it is important to correctly connect the
internal drive cables to the installed drive. For more information, see “Internal
Drives” on page 47.
Important
Ÿ
Run ConfigSafe (or a similar application) to take a snapshot of your computer
configuration before installing an optional device. This allows you to view
and compare the changes in the computer configuration after you install an
option. Also, if you have problems configuring the option after it is
installed, ConfigSafe allows you to restore the configuration to the previous
settings.
ConfigSafe is a part of the preinstalled software in your computer. For more
information, see About Your Software that comes with your computer.
Ÿ
Be careful when working near the microprocessor. Under normal use, the
microprocessor can become very hot.
46

Copyright IBM Corp. 1998