IBM NetVista A20, Quick Reference

Page: 18 / 60

7.
Connect any universal serial bus (USB) device cables to the USB
connectors.
8. Connect external audio device cables, such as speakers, microphone, or
headphone cable to the appropriate connector (available on some models
only.)
9.
For models with a modem, connect the phone-line cable to the modem
connector. For models with an Ethernet feature, connect the Ethernet cable
to the Ethernet connector.
Important
To operate the computer within FCC Class A or Class B limits, use a
category 5 Ethernet cable.
10.
Connect the power cords into properly grounded electrical outlets.
Note: When the power cord is first plugged in, the computer might turn
on for a few seconds, then turn off. This is normal.
Turning on power
Turn on the monitor and other external devices first. Turn on the computer.
When the self-test is done, the IBM logo screen disappears. If your computer
has preinstalled software, the software installation program begins.
Important
Please read the license agreements carefully before using the programs
included with this system. These agreements detail your rights,
obligations, and warranties for the software included with this system.
By using the programs, you accept the terms of these agreements. If you
do not accept the agreements included with this system, do not use the
programs. Instead, promptly return the system for a full refund.
4
Quick Reference