IBM Netfinity ServeRAID-4H Ultra160, User Reference

Page: 68 / 192

Installing IPSSEND for Windows 2000, Windows NT 4.0, NetWare,
or OS/2
To install these programs for Windows NT, Windows 2000, NetWare, or OS/2:
1. Start the server.
2. After the operating system starts, insert the IBM ServeRAID Support CD into the
CD-ROM drive.
3. If you are using NetWare, go to step 5 If you are using Windows NT, Windows
2000 or OS/2, create an IPSADM directory on your hard disk. To do this, go to
the operating system command prompt and type:
md c :\ipsadm
where c is the drive letter of the drive where Windows NT, Windows 2000, or
OS/2 is installed.
4. Press Enter.
5. Copy the IPSSEND.EXE file to your hard disk drive by typing one of the
following at the command prompt:
v
For Windows NT, type:
copy z :\programs\winnt\cmdline\nt4_0\ipssend.exe c :\ipsadm
v
For Windows 2000, type:
copy z :\programs\winnt\cmdline\win2k\ipssend.exe c :\ipsadm
v
For NetWare, from a DOS prompt type:
copy z :\programs\netware\cmdline\ipssend.nlm c :\nwserver
v
For OS/2, type:
copy z :\programs\os2\cmdline\ipssend.exe c :\ipsadm
Notes:
a. Where z is the drive letter for the CD-ROM drive that contains the IBM
ServeRAID Support CD and c is the drive letter where Windows NT,
Windows 2000, NetWare, or OS/2 is installed.
b. These instructions assume that you installed NetWare in the NWSERVER
directory.
6. Press Enter. Remove the CD from the CD-ROM drive.
Installing IPSSEND for Linux
To install these programs for Red Hat Linux 6.1 (or later):
1. Start the server.
2. After the operating system starts, insert the IBM ServeRAID Support CD into the
CD-ROM drive.
3. Mount the CD by typing the following at the console:
mount -t iso9660 -o ro /dev/cd0 /mnt
Notes:
a. where /dev/cd0 is the specific device file for the CD-ROM block device. If
you have more than one CD-ROM, you must replace /dev/cd0 with the
specific name of the CD-ROM you want to use.
b. If you currently have another device mounted on /mnt, you must create a
new directory and substitute its name for /mnt in these instructions.
4. Press Enter; then, type:
cp /mnt/programs/linux/cmdline/ipssend /usr/bin
5. Press Enter; then, type:
chmod 700 /usr/bin/ipssend
54
IBM
®
Netfinity
®
User’s Reference: ServeRAID
™
-4H Ultra160 SCSI Controller