IBM Netfinity Fibre Channel PCI Adapter, Installation And User Handbook

Page: 11 / 52

Chapter 2. Installing the Adapter
This chapter describes the steps you need to follow before and
during the installation of the Netfinity Fibre Channel PCI Adapter.
Preinstallation Procedures
Before you begin
Ÿ
Read “Handling Static-Sensitive Devices.”
Ÿ
Read “What You Need for Installation” on page 4.
Handling Static-Sensitive Devices
Static electricity, though harmless to you, can seriously damage
adapter components or options.
Note: When you are adding an internal option, do not open the
static-protective package containing the option until you are
instructed to do so.
When you handle options and other adapter components, take these
precautions to avoid damage from static electricity:
Ÿ
Limit your movement. Movement can cause static electricity to
build up around you.
Ÿ
Always handle components carefully. Never touch any exposed
circuitry.
Ÿ
Prevent others from touching components.
Ÿ
When you are installing a new option, touch the static-protective
package containing the option to a metal expansion-slot screw
or other unpainted metal surface on the adapter for at least two
seconds. (This reduces static electricity from the package and
from your body.)
Ÿ
When possible, remove the option and install it directly into the
adapter without setting the option down. When this is not
possible, place the static-protective package that the option
comes in on a smooth, level surface and place the option on it.
Ÿ
Do not place the option on the adapter's covers or any metal
surface.

Copyright IBM Corp. 1998
3