IBM Netfinity FASt T500, User Reference

Page: 57 / 91

Chapter 3. Replacing controller unit components 37
CAUTION:
Never remove the cover on a power supply or any part that has the following label
attached.
Hazardous voltage, current, and energy levels are present inside any component that
has this label attached. There are no serviceable parts inside these components. If
you suspect a problem with one of these parts, contact a service technician.
5 Using Figure 19 as a guide, remove the battery.
a Loosen the four captive screws on the battery. If they are too tight, use a flat blade
screwdriver to loosen the screws.
b Using the pull handles, slide out the battery about 5 cm (2 in.).
c Using both hands, grasp the sides of the battery and pull out.
Figure 19. Removing and installing a battery
8
Captive screws
Pull handle