IBM N7800, Hardware And Service Manual

Page: 28 / 182

To reduce the possibility of electrostatic discharge (ESD), observe the following
precautions:
v
Limit your movement. Movement can cause static electricity to build up around
you.
v
Handle the device carefully, holding it by its edges or its frame.
v
Do not touch solder joints, pins, or exposed printed circuitry.
v Do not leave the device where others can handle and possibly damage the
device.
v
While the device is still in its static-protective package, touch it to an unpainted
metal part of the system unit for at least two seconds. This drains static
electricity from the package and from your body.
v
Remove the device from its package and install it directly into your system unit
without setting it down. If it is necessary to set the device down, place it in its
static-protective package. Do not place the device on your system unit cover or
on a metal table. Take additional care when handling devices during cold
weather because heating reduces indoor humidity and increases static electricity.
Planning and organizing the installation
This section identifies the shipment contents and the rules and regulations you
need to observe for the proper installation of your N7000 series system. It also
provides an overview of the entire system installation process and the appropriate
documentation references for the procedures.
For detailed information, see the following topics:
v
“Telecommunication regulatory statement”
v
“Hardware specifications”
v
“Checking shipment package contents” on page 5
v
“Rules for installing the N7000 series system in a rack” on page 6
v “Guide to the installation process” on page 7
Telecommunication regulatory statement
This product may not be certified in your country for connection by any means
whatsoever to interfaces of public telecommunications networks. Further
certification may be required by law prior to making any such connection. Contact
an IBM representative or reseller for any questions.
Hardware specifications
The following tables list the characteristics and requirements for your hardware.
svc00168
32-55 kg (70.5-121.2 lbs)
DANGER
The weight of this part or unit is between 32 and 55 kg (70.5 and 121.2 lb.). It
takes three persons to safely lift this part or unit. (C010)
2
IBM System Storage: N7000 Series Hardware and Service Guide