IBM N7800, Hardware And Service Manual

Page: 31 / 182

Table 7. N7800 and N7900 electrical requirements with five Performance Acceleration
Modules or Flash Cache modules (continued)
Input voltage
100 to 120V 200 to 240V
Worst-case,
single PSU Typical single
PSU/system Worst-case,
single PSU Typical single
PSU/system
Input power measured,
W 1203 376/752 1158 368/736
Thermal dissipation,
BTU/hr 4104 1283/2566 3950 1255/2509
Input power frequency,
Hz 50 to 60
Checking shipment package contents
About this task
Make sure that your shipment package includes the following items.
v
N7700 single-controller system (2866-A11)
– 1 N7700 single-controller system (2866-A11) containing the power supplies
and any options you ordered
– 1 console adapter cable, RJ-45 to DB-9
– 1 cable management tray
– 1 ESD wrist strap
– 1 serial null modem cable
– 1 set of IBM publications
– 2 power cords
– 8 SFPs (SFPs might be installed in the N7000 series system as shipped.)
There will also be envelopes with the software EULA and license keys.
A rail kit for mounting the N7700 in a standard 19–inch rack may also be
present.
v
N7700 dual-controller system (2866-A21)
– 1 N7700 dual-controller system (2866-A21) containing the power supplies and
any options you ordered
– 2 console adapter cables, RJ-45 to DB-9
– 2 cable management trays
– 2 ESD wrist straps
– 1 serial null modem cable
– 1 set of IBM publications
– 4 power cords
– 16 SFPs (SFPs might be installed in the N7000 series system as shipped.)
There will also be envelopes with the software EULA and license keys.
A rail kit for mounting the N7700 in a standard 19–inch rack may also be
present.
v N7900 single-controller system (2867-A11)
– 1 N7900 single-controller system (2867-A11) containing the power supplies
and any options you ordered
– 1 console adapter cable, RJ-45 to DB-9
– 1 cable management tray
Chapter 1. Preparing for the installation
5