IBM N Series, Implementation Manual

Page: 71 / 105

Chapter 6: Managing a S ystem with Disks and Array LUNs 57
storage show disk
-T output
You can use the
storage show disk
command to display attribute information
about all the disks and array LUNs connected to your gateway. When the
-T
option is used with the
storage show disk
command, the “disk” type is shown.
(If your output from the
storage show disk -T
command is truncated, try
adding the
-x
option either before or after
-T
—for example,
storage show disk
-T -x
.)
In the following
storage show disk -T
command output, the topmost entries
are for Fibre Channel disks and the bottom entries are for array LUNs.