IBM MTM 2145-12F, Hardware Installation Manual

Page: 111 / 214

▌1▐
Inner connector on upper CMA
▌2▐
Connector base on inner rail member
▌3▐
Outer connector on upper CMA
▌4▐
Connector base on outer rail member
▌5▐
Support rail connector on upper CMA
▌6▐
Connector base on outer rail member
2. Install the inner connector of the upper CMA assembly (
▌1▐
) to the inner
member of the left support rail (
▌2▐
), as shown in Figure 71 from the outer and
inner support rails.
3. Install the inner connector of the upper CMA assembly (
▌3▐
) to the inner
member of the left support rail (
▌4▐
), as shown in Figure 72 on page 78.
svc01035
1
2
3
4
5
6
Figure 70. Connectors for the cable management arm
1
4
2
svc01036
Figure 71. Install the inner connector of the upper CMA to the inner member of the support rail
Chapter 4. Installing an optional 5U SAS expansion enclosure
77