12
Jumper Settings
Connecting two pins with a jumper cap is SHORT; removing a
jumper cap from these pins, OPEN.
Jumper JBAT1: Clear CMOS Memory
Use this jumper to clear the contents of the CMOS memory. You
may need to clear the CMOS memory if the settings in the Setup
Utility are incorrect and prevent your mainboard from operating.
To clear the CMOS memory, disconnect all the power cables from
the mainboard and then move the jumper cap into the CLEAR
setting for a few seconds.
Function Jumper
Setting
Normal Operation
Short Pins 1-2
Clear CMOS Memory
Short Pins 2-3
Install the Mainboard
Install the mainboard in a system chassis (case). The board is a
FLEX ATX size mainboard. You can install this mainboard in an
ATX case. Make sure your case has an I/O cover plate matching
the ports on this mainboard.
Install the mainboard in a case. Follow the case manufacturer’s
instructions to use the hardware and internal mounting points on
the chassis.
JBAT1
1
