4
Install the back cover
Align the power cable with the slot on the inside of the cover.
Tip:
There should not be a noticable gap between the cover and the workstation.
It may be necessary to place one hand on the front of the system as you push the
cover into place in order to gain enough leverage to firmly seat the cover onto the
workstation.
4.1
4.2
4.3
4.4
Route all cables through the cable clamp
and attach the cable clamp into the back
of the workstation.
F
Place the pins
on the bottom of the cover into the slots
at the bottom of the
workstation.
G
H
Rotate the cover toward the workstation and apply pressure until you hear an
audible click.
F
G
H
