13
Setting Control Group
From the configuration menu, press “2” to modify the access password and
enabled/disabled status of the available network protocols (see Figure 2-10).
Figure 2-10 Control Group Configuration Menu
No. Function
Description
Example/Remark
1.
HTTP Login UserName HTTP access login string
“inSentry”
2.
Community Read-Only General password for read-only access
“public”
3. Community
Read/Write
Administrator password for read and write
access
“admin”
4. BOOTP/DHCP
Control
Enable/disable the BOOTP/DHCP protocols Disable
5.
TFTP Upgrade Control
Enable/disable the TFTP protocol for
firmware upgrades through the local network
Enabled
8. PING
Echo
Control
Enable/Disable inSentry to response to Ping
request.
Enable
7. Telnet
Control
Enable/disable the TELNET protocol
Enable
9. HTTP
Control
Enable login and password request for HTTP
access
Enable
8. SNMP
Control
Enable login and password request for SNMP
access
Enable
After completing these settings, press “0” to return to the configuration menu.
Setting Parameter Group
From the configuration menu press “3” to modify the SNMP identification
information, and the speed of reading data from inSentry (see Figure 2-11)
Figure 2-11 Parameter Group Configuration Menu
Summary of Contents for inSentry-man-E210
Page 1: ...inSentry man E210 ...
