IBM ILM300, User Manual

Page: 39 / 66

Replacing the batteries in the remote control
The life of the batteries depends on how often and how long you use the remote control. Symptoms of
low battery charge include erratic responses when using the remote control and a reduced range of
operation.
Follow these steps to replace the batteries:
1. Turn the remote face down in your hand.
2. Press the tab on the battery door toward the back of the remote and slide the door off.
3. Remove the old batteries and dispose of them in an environmentally proper manner.
4. Install two new AAA alkaline batteries. Make sure you install each battery in the correct direction.
5.
Slide batter door into the correct, locked position.
Appendix B. Maintenance and troubleshooting
29