IBM iLC400, User Manual

Page: 32 / 95

Operating range
This remote control uses infrared transmission to control the projector. It is not
necessary to point the remote directly at the projector. The remote control will
function within a maximum radius of 10m (32.8 ft) and 30° above or below the
projector level. If the projector does not respond to the remote control, please see
Appendix B, “Troubleshooting,” on page B-1.
Note: The remote will still work when it is pointed at the projected image.
Projector and remote control buttons
The projector can be operated using the remote control or the buttons on the top of
the projector. All operations can be carried out with the remote control. The figure
below shows the corresponding buttons on the remote control and on the projector
for OSD menu operation.
1
Menu
2
Left button
3
Down button
4
Right button
5
Up button
6
Enter button
Chapter 4. Using the projector features
4-3