IBM iDataPlex dx360 M4, Product Manual

Page: 19 / 50

IBM System x iDataPlex dx360 M4 19
The ServeRAID H1110 adapter has the following specifications:
Four internal 6 Gbps SAS/SATA ports.

One x4 mini-SAS internal connector (SFF-8087).

6 Gbps throughput per port.

Based on LSI SAS2004 6 Gbps RAID on Chip (ROC) controller.

x4 PCI Express 2.0 host interface.

Supports RAID 0, 1, 1E, and 10.

SAS and SATA drives are supported, but the mixing of SAS and SATA in the same integrated volume

is not supported.
Supports up to two integrated volumes.

Supports up to two global hot-spare drives.

Supports drive sizes greater than 2 TB for RAID 0, 1E, and 10 (not RAID 1).

Fixed stripe size of 64 KB.

The IBM ServeRAID M1115 adapter has the following specifications:
Eight internal 6 Gbps SAS/SATA ports

Two x4 mini-SAS internal connectors (SFF-8087)

Supports RAID levels 0, 1, and 10

Supports RAID levels 5 and 50 with optional M1100 Series RAID 5 upgrades

6 Gbps throughput per port

PCIe x8 Gen 3 host interface

Based on the LSI SAS2008 6 Gbps ROC controller

The IBM ServeRAID M5110 adapter has the following specifications:
Eight internal 6 Gbps SAS/SATA ports

Two x4 mini-SAS internal connectors (SFF-8087)

Supports RAID levels 0, 1, and 10

Supports RAID levels 5 and 50 with optional M5100 Series RAID 5 upgrades

Supports RAID 6 and 60 with the optional M5100 Series RAID 6 Upgrade

Supports 512 MB battery-backed cache or 512 MB or 1 TB flash-backed cache

6 Gbps throughput per port

PCIe x8 Gen 3 host interface

Based on the LSI SAS2208 6 Gbps ROC controller

The IBM 6Gb SAS Host Bus Adapter has the following specifications:
Four internal SATA connectors

One external SAS x4 connector (SFF-8088)

PCI Express x8 2.0 host interface

SAS Controller: LSI SAS2008

6 Gbps per port data transfer rate

MD2 small form factor

High performance I/O Processor: PowerPC® 440 @ 533 MHz

RAID levels : None (uses RAID as provided by external disk enclosures)

Maximum endpoint devices: 512
