manualshive.com logo in svg

IBM IBM Infoprint 1572 MICR 50, User Manual

Share
Download
IBM IBM Infoprint 1572 MICR 50 User Manual Download Page 12

Secure MICR Printer User’s Guide 

 

 

© Source Technologies 

March 2006 

8

 

 

All Rights Reserved 

On-Us Field 

Positions 32 to 14

 

The On-us field contains the makers’ account number. The structure and content 
of this field is left to the drawee bank.  On personal checks this field also contains 
the check serial numbers.  The On-Us field may not consist of more than 19 
characters.  An On-Us (;) symbol must appear immediately to the right of the 
account number. 
 

Blank Field 

Position 13

 

Position 13 is always left blank. 
 

Amount Field 

Positions 1 to 12

 

The amount field is the right most field in the MICR line.  It remains blank until it is 
printed by the bank of first deposit.  When the check enters the banking system, 
the bank of first deposit encodes this field from data in the convenience amount 
field.  It will be bounded by Amount Symbols (/). 

 
 

Summary of Contents for IBM Infoprint 1572 MICR 50







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands