background image

; GSI = {

; Mapfile Specifier = LDAP:/var/hpss/etc/KRB2UnixMapfile

            ; Use Site Auth Method = CryptoCard

            ; Default Authorization Mechanism = LDAP

; }

; IDENT = {

            ; Mapfile Specifier = FILE:/var/hpss/etc/IDENT2UnixMapfile

; Use Site Auth Method = SecurId

            ; Default Authorization Mechanism = DBAS

; }

USER_PASS = {

    

; Use Site Auth Method = KRB5KDC

            ; Mapfile Specifier = FILE:/var/hpss/etc/Unix2UnixMapfile

            Default Authorization Mechanism = UNIX

}

    }

    #  Keytab Hostname Mapping Section

    #  Syntax:

    #      machinename Service Name = canonicalname

    #  "machinename" is the name returned by a call to gethostname()

    #  in the PFTP Daemon.

    #  "canonicalname" is the machine name associated with the Kerberos

    #  service - usually the fully qualified name as generated by the

    #  PFTP Client

    #  Specify "{machinename} Service Name" to set the service name to be 

used

    #  for the PFTP Daemon machine when acquiring creds.  This is needed

    #  when the servername; e.g., host/machinename@realm is different

    #  between the keytab file and the host/machinename obtained where

    #  the machinename is obtained by gethostname() (Non-HPSS PFTP Daemon)

    #  Specify nultiple "machinename Service Name" entries if this

    #  file is common to multiple PFTP Daemon servers.

    ; aixrahe.sandia.gov Service Name = aixrahe.sandia.gov

    ; sunrahe Service Name = sunrahe.sandia.gov

}

D.6.   Transfer Agent Stanza

A large number of options are available for configuring the Transfer Agent and tuning its 
performance.  The Transfer Agent is still under development and the following options are subject to 
change without prior notification.

Table 17.  Transfer Agent Stanza Description

Configuration Type

Abbreviated Description

Stanza (CMPD)

Transfer Agent = { 

Reserved 

Stanza specifier.

Must be terminated with a matching “}”

HPSS Installation Guide

July 2008

Release 6.2 (Revision 2.0)

287

Summary of Contents for High Performance Storage System HPSS
























































































































































































































































































































Reviews: