IBM Gigabit Fibre Channel PCI Adapter 4-S, Installation And Using Manual

Page: 24 / 46

dsh mount [controlwks]:/spdata/sys1/install/[lppsource] /mnt
substituting the directory name which was recorded in step 4b on page 11 for [lppsource] , and
substituting the name of the Control Workstation for [controlwks] .
4. Perform a preview of the files to be installed on the nodes. Type the following commands one line at a
time, including the quotation marks, at the AIX command prompt. Press Enter after each line.
For adapter Type 4-S:
dsh "lslpp -l devices.pci.df1000f7\ 2>&1" |more
For adapter Type 4-W:
dsh "lslpp -l devices.pci.df1000f9\ 2>&1" |more
For adapter Type 5704:
dsh "lslpp -l devices.pci.df1080f9\ 2>&1" |more
And continue for other device drivers being installed, such as:
dsh "lslpp -l devices.common.IBM.fc\ 2>&1" |more
dsh "lslpp -l devices.fc.disk\ 2>&1" |more
dsh "lslpp -l devices.fc.disk.array\ 2>&1" |more
dsh "lslpp -l devices.fc.tape\ 2>&1" |more
5. Perform the device driver installation. Type the following commands one line at a time, including the
quotation marks, at an AIX command prompt. Press Enter after each line.
For adapter Type 4-S:
dsh "installp -p acgqXd /mnt devices.pci.df1000f7 2>&1"| more
For adapter Type 4-W:
dsh "installp -p acgqXd /mnt devices.pci.df1000f9 2>&1"| more
For adapter Type 5704:
dsh "installp -p acgqXd /mnt devices.pci.df1080f9 2>&1"| more
And continue for other device drivers being installed, such as:
dsh "installp -p acgqXd /mnt devices.common.IBM.fc 2>&1"| more
dsh "installp -p acgqXd /mnt devices.fcp.disk 2>"&1| more
dsh "installp -p acgqXd /mnt devices.fcp.disk.array 2>&1"| more
dsh "installp -p acgqXd /mnt devices.fcp.tape 2>"&1| more
6. When device driver installation is complete on the node(s), contact your service provider to have the
adapter(s) installed.
14
Gigabit Fibre Channel PCI Adapter Installation and Using Guide