IBM G8316, Installation Manual

Page: 26 / 84

Status LEDs for the QSFP+ ports are described in the following table. When the
port is 40 GbE mode, only the first LED applies. When the port is in 10 GbE mode,
each LED provides status for its corresponding 10 GbE port, as noted in the
following table.
Table 8. SFP+ LEDs status
Steady green Flash green Off
Valid link Activity No Link
Technical specifications
The RackSwitch technical specifications are described in the following sections.
Physical characteristics
The physical characteristics of the RackSwitch are listed in the following table.
Table 9. Physical characteristics
Specification Physical characteristics
Dimensions (H x W x D) 4.4 x 43.9 x 51.3 cm.
(1.73 x 17.3 x 20.2 in.)
Weight 10.5 kg. (23 lb) (maximum)
Environmental specifications
The environmental specifications for the RackSwitch are listed in the following table.
Table 10. Environmental specifications
Specification Measurement
Temperature, ambient operating 0°C to +40°C (32° to 104°F)
Temperature (fan failure), operating 0°C to +35°C (32° to 95°F)
Temperature, storage -40°C to +85°C (-40° to 185°F)
Relative humidity (non-condensing),
operating 10 to 90%
Relative humidity (non-condensing), storage 10 to 90%
Altitude, operating 1,800 m (6,000 feet)
Altitude, storage 12,190 m (40,000 feet)
Acoustic noise Less than 65dB
Heat dissipation 955 BTU/hour (typical)
1262 BTU/hour (maximum)
Power specifications
The power specifications for the RackSwitch are listed in the following table.
Table 11. AC power specifications
Specification Measurement
Number of power supplies 2 (1+1 load sharing/redundant)
AC-input frequency (universal) 50 - 60 Hz
AC-input voltage (universal) 100-240 VAC
10
IBM System Networking RackSwitch G8316, Type 8036 and Type 1611-16E: Installation Guide