IBM FlashSystem 9150, Hardware Installation Manual

Page: 18 / 28

a. Ensure that the serial number on the left end cap matches the serial number
on the left flange ("ear") on the front of the enclosure.
b.
Fit the slot on the top of the end cap over the tab on the flange.
c. Rotate the end cap down until it snaps into place.
d. Ensure that the inside surface of the end cap is flush with the flange.
What to do next
If you removed components from the enclosure to lift it, reinstall the components
into the slots of the enclosure from which they were removed.
14
FlashCore Forever: Hardware Installation Guide