IBM
Installation Instructions
10.6 Restoring the Service Processor Hard Disk from the
Optical Disk.
Notes
1. This function is available from the Service Processor Installation
Diskette 1 and can take up to 1.5 hour to restore the whole disk.
2. Use the backup optical disk to restore the hard disk data.
3. This function is used to restore the data on the hard disk after its replace-
ment and also used to maintain the backup Service Processor hard disk
to the same level as the active Service Processor.
1. Install the Service Processor Installation Diskette 1 in the diskette drive.
2. Power ON the Service Processor.
3. Install the backup optical disk in the optical drive.
4. On the first screen displayed, press Enter
5. From the primary window select option Restore hard disk and follow the
prompts.
Note: Stay in front of the screen as you will have to answer several prompts
and may have to manipulate the Service Processor Installation Diskette 1 and
2.
6. Wait, when message Operation Successfully Completed, then press Enter.
7. At the end, select Exit from the primary window and follow the prompts.
11.0 Test Procedures
No test required.
12.0 Field Updating
None.
3746
PN 29H4179
EC D55911A
EC E46709
FFBM
22 of 24
08 DEC 95
16 MAY 97
22
