IBM
Installation Instructions
10.5 Updating the System Program.
10.5.1 Restoring the System Partition.
1. Install the Reference Diskette in the service processor.
2. Power ON the service processor.
3. The IBM Logo appears on the screen, followed by the Main Menu of the
system programs.
4. Select Backup/Restore system programs from the Main menu.
5. Select Restore the System Partition and follow the instructions on the
screen.
10.5.2 Setting the System Configuration.
1. On Main Menu screen, select Set Configuration, then press ENTER.
2. On Configuration Screen, select Change Configuration, then press
ENTER.
3. Check configuration, Token Ring Adapter speed should be set to 16 Mb/s,
make necessary change.
4. On Main Menu Screen, select Set and View SCSI Configuration, then
press ENTER.
The following window is displayed.
à
@
ð
Set and View SCSI Device Configuration
IBM PS/2 System Board SCSI
SCSI Address (ID)................... 7
SCSI Device
Device Type.................... Hard Disk
Device Address (ID, LUN)....... 6,ð
Device Size.................... 2.ðGB
Presence Error Reporting....... (ENABLED)
SCSI Device
Device Type.................... Optical Memory
Device Address (ID, LUN)....... 3,ð
Presence Error Reporting....... (ENABLED)
á
ñ
5. Do the necessary changes, then exit from configuration.
6. Power OFF the Service Processor.
3746
PN 29H4179
EC D55911A
EC E46709
FFBM
21 of 24
08 DEC 95
16 MAY 97
21
