![IBM EtherJet 10BASE-T ISA
Adapter Manual Download Page 65](http://html1.mh-extra.com/html/ibm/etherjet-10base-t-isa-adapter/etherjet-10base-t-isa-adapter_manual_607894065.webp)
Manually Installing the ODI Client Driver for DOS
You can install the DOS ODI client driver to use the EtherJet ISA
Adapter in an existing ODI workstation, such as that provided by the
NetWare DOS Requester or by the Novell NetWare DOS ODI Shell.
The following steps describe the incorporation of the driver into an
existing installation of the NetWare Requester.
1
Find the target directory path on the diskette or the hard disk
where the NetWare Requester code is installed, for example,
C:\NWCLIENT
.
2
From the
\DOS
subdirectory on the Device Drivers diskette,
copy
IBMEINWC.COM
to the target directory.
3
If the PATH statement in AUTOEXEC.BAT has not already
been changed, add the directory path from step 1 to the PATH
statement: for example,
PATH=C:\DOS;C:\NWCLIENT
4
The NetWare Requester is started with batch commands that
can be incorporated into the AUTOEXEC.BAT, called from the
AUTOEXEC.BAT or entered manually.
For example, create a batch file, STARTNET.BAT in
C:\NWCLIENT
, which is invoked from the AUTOEXEC.BAT file
and contains the following batch commands:
LSL
IBMEINWC.COM
IPXODI
VLM or NETX
5
To change the IBMEINWC.COM driver parameter default
values, edit the NET.CFG file. See the following example or
Novell NetWare Workstation for DOS and MS Windows for a
sample NET.CFG file. Copy the edited NET.CFG file to the
Adapter diskette:
Device Drivers diskette
Directory: \DOS
6-28
EtherJet ISA Adapters Installation and User Guide
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21