Chapter 6. Installing the Device Drivers for
Your Network Environment
This chapter contains the instructions for installing drivers that the
EtherJet ISA Adapter needs for communication over an Ethernet
network. It includes both manual and automatic installations.
If you are installing drivers for more than one EtherJet ISA Adapter in
the same workstation, make sure that you have performed for each
adapter the steps described in Chapter 4, “Installing the Adapter”
and Chapter 5, “Configuring the Adapter with LANAID” before you
start the driver installation.
Automatic Driver Installation
Automatic Installation contains instructions for automatically installing
the EtherJet ISA Adapter drivers. You must have an installation aid
to use the procedures in this section.
Manual Driver Installation
Manual Installation contains instructions for manually installing the
EtherJet ISA Adapter drivers. Manual installation must be performed
if you do not have an installation aid program. Manual installation
involves copying the drivers from the Device Drivers diskette to the
appropriate directory on the workstation and editing files, such as the
CONFIG.SYS, PROTOCOL.INI, AUTOEXEC.BAT, and NET.CFG
files.
Installation Instruction Table
Table 6-1 on page 6-2 is an index to the driver installation
instructions. To use the table, locate the row that describes the
network environment for your workstation.
Copyright IBM Corp. 1995
6-1
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
