IBM eServer xSeries 226 Type 8648, Option Installation Manual

Page: 14 / 76

v
Attention: These notices indicate potential damage to programs, devices, or
data. An attention notice is placed just before the instruction or situation in which
damage could occur.
v Caution: These statements indicate situations that can be potentially hazardous
to you. A caution statement is placed just before the description of a potentially
hazardous procedure step or situation.
v Danger: These statements indicate situations that can be potentially lethal or
extremely hazardous to you. A danger statement is placed just before the
description of a potentially lethal or extremely hazardous procedure step or
situation.
Major components of the xSeries 226 Type 8648 server
Blue on a component indicates touch points, where you can grip the component to
remove it from or install it in the server, open or close a latch, and so on.
Orange on a component or an orange label on or near a component indicates that
the component can be hot-swapped, which means that if the server and operating
system support hot-swap capability, you can remove or install the component while
the server is running. (Orange can also indicate touch points on hot-swap
components.) See the instructions for removing or installing a specific hot-swap
component for any additional procedures that you might have to perform before you
remove or install the component.
The following illustration shows the major components in the server. The
illustrations in this document might differ slightly from your hardware.
DIMMs
Heatsink 2
Microprocessor 2
Microprocessor
baffle assembly
Microprocessor
air baffle
VRM
Front adapter-support
bracket assembly
Rear adapter-support
bracket
Bezel assembly
Bezel filler
(on SATA models)
EMC shield
Filler panel
Frame support bracket
Drive cage
Cover
SCSI drive and
filler panel
(on SCSI models)
SATA drive
(on SATA models)
2
xSeries 226 Type 8648: Option Installation Guide