__ 11.
Remove the card filler plate.
__ 12.
Attention:
Adapter cards are fragile:
v
Handle only by the edges
v
Keep fingers off printed circuit area
v
Use static strap when handling
v
Leave in protective packaging until ready to install
__ 13.
Align the new adapter card with the card holders inside the system unit
and push until it is connected securely.
__ 14.
Swing the black latch in and move the other latch clockwise, or install the
screw to secure the card.
__ 15.
Go to “Connecting the Twinaxial cable attachment and Twinaxial console
cable”.
Connecting the Twinaxial cable attachment and Twinaxial console
cable
__ 1.
Find the 8-port Twinaxial cable attachment (
part number 21F5093
) and label
the cable, for example,
C06
.
__ 2.
Connect the 8-port Twinaxial cable attachment to the connector on the 2746
card.
Note:
Each port on the 8-port attachment cable supports seven devices that
allow for 56 attached devices, of which only 40 can be active.
Figure 2. Example of 830, 840, 870, 890, SB2, SB3, 5079 Card Latches
Upgrade Operations Console to twinaxial console
5
