B.0 Appendix B. Fault Symptom Codes and Error Recovery Procedure Numbers
Use Figure 17 to resolve error messages that appear on the LCD of the 7208 Tape Drive Model 342:
1. Determine the fault symptom code (FSC) in the error message (the first two digits in the message). For example, in error message
ERR 1:
AD 58 C0
, the FSC is
AD
.
2. Locate the FSC in Figure 17 and identify the error recovery procedure (ERP) number for that FSC.
3. Locate the ERP number in Figure 18 in topic C.0, and identify the recommended error recovery procedure.
Note:
Items in the Cause column are defined as follows:
+---------------------------------+
¦ A = Application ¦ O = Operator ¦
¦ software ¦ ¦
+------------------+--------------¦
¦ B = Bus (SCSI) ¦ S = System ¦
+------------------+--------------¦
¦ D = Drive ¦ T = Tape ¦
+------------------+--------------¦
¦ I = ¦ ¦
¦ Informational ¦ ¦
¦ message ¦ ¦
+---------------------------------+
+------------------------------------------------------------------------+
¦ Figure 17. Fault Symptom Codes (FSC) and Error Recovery Procedure ¦
¦ (ERP) Numbers ¦
+------------------------------------------------------------------------¦
¦ ¦ ¦
ERP
¦ ¦
¦
FSC
¦
Description
¦
Number
¦
Cause
¦
+-----------+------------------------------------+-----------+-----------¦
¦ ¦ ¦ ¦ O = 50% ¦
¦ 02 ¦ Invalid position for WRITE ¦ 2 ¦ ¦
¦ ¦ ¦ ¦ S = 50% ¦
+-----------+------------------------------------+-----------+-----------¦
¦ ¦ ¦ ¦ D = 5% ¦
¦ ¦ ¦ ¦ ¦
¦ 03 ¦ Tape is write protected for WRITE ¦ 5 ¦ O = 90% ¦
¦ ¦ ¦ ¦ ¦
¦ ¦ ¦ ¦ T = 5% ¦
+-----------+------------------------------------+-----------+-----------¦
¦ 04 ¦ LEOT encountered on current WRITE ¦ 10 ¦ I ¦
+-----------+------------------------------------+-----------+-----------¦
¦ ¦ Operation has aborted (as ¦ ¦ D = 50% ¦
¦ 05 ¦ requested) ¦ 11 ¦ ¦
¦ ¦ ¦ ¦ O = 50% ¦
+-----------+------------------------------------+-----------+-----------¦
¦ 06 ¦ LEOT encountered on the last WRITE ¦ 10 ¦ I ¦
+-----------+------------------------------------+-----------+-----------¦
¦ 08 ¦ Compression data integrity check ¦ 12 ¦ D = 100% ¦
¦ ¦ failed ¦ ¦ ¦
+-----------+------------------------------------+-----------+-----------¦
¦ 09 ¦ Detected LEOT during READ ¦ 10 ¦ I ¦
+-----------+------------------------------------+-----------+-----------¦
¦ 0A ¦ Length mismatch on READ ¦ 15 ¦ I ¦
+-----------+------------------------------------+-----------+-----------¦
¦ ¦ ¦ ¦ D = 10% ¦
¦ 0B ¦ Uncorrectable block on READ ¦ 8,6 ¦ ¦
¦ ¦ ¦ ¦ T = 90% ¦
+-----------+------------------------------------+-----------+-----------¦
¦ 0C ¦ EOD encountered on READ ¦ 13 ¦ I ¦
+-----------+------------------------------------+-----------+-----------¦
¦ 0D ¦ Filemark encountered during a READ ¦ 10 ¦ I ¦
+-----------+------------------------------------+-----------+-----------¦
¦ ¦ ¦ ¦ D = 50% ¦
¦ 0E ¦ Illegal condition for READ ¦ 2 ¦ ¦
¦ ¦ ¦ ¦ S = 50% ¦
+-----------+------------------------------------+-----------+-----------¦
¦ 0F ¦ READ issued at blank tape ¦ 4 ¦ I ¦
+-----------+------------------------------------+-----------+-----------¦
¦ ¦ READ operation has aborted (as ¦ ¦ D = 50% ¦
¦ 10 ¦ requested) ¦ 11 ¦ ¦
¦ ¦ ¦ ¦ O = 50% ¦
+-----------+------------------------------------+-----------+-----------¦
¦ ¦ Too many permanent READ errors, ¦ ¦ D = 10% ¦
¦ 11 ¦ cannot sync ¦ 8,6 ¦ ¦
¦ ¦ ¦ ¦ T = 90% ¦
+-----------+------------------------------------+-----------+-----------¦
¦ ¦ PEOT or PEOP encountered on a READ ¦ ¦ D = 50% ¦
7208 Tape Drive Setup and Operator Guide
Appendix B. Fault Symptom Codes and Error Recovery Procedure Numbers
¦ Copyright IBM Corp. 1998
B.0 - 1
