Step 9B: Custom Installation
If you do not wish to use Ontrack® or if your system will install the drive without the overlay program,
continue by checking your drive’s settings in your BIOS.
BIOS Settings
Begin by checking the CMOS settings. The example below is an Award© BIOS version 4.51. Other BIOSs
should be similar. Follow the instructions provided with your system.
To enter the CMOS setup screen press the key sequence designated by your system manufacturer (i.e.
<F1>; <DELETE> <ESC>; <CTRL> <ALT> <S>) during the initial boot process. This will bring up the
following screen.
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
HDD LOW LEVEL FORMAT
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
: Select Item (Shift)F2: Change Color
F10 Save & Exit Setup
Time, Date, Hard Disk Type...
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
ROM PC/ISA BIOS (2A5IHROB)
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
Select “Standard CMOS Setup”. This selection will bring up the following screen.
Page 15 Version 3.0