IBM DS8800, Introduction And Planning Manual, Page: 9 / 256

Figures
1. A Model 941 (2-way processor with the front
cover off) and its main components .
. . . . 2
2. A 94E expansion model (with the back cover
off) and its main components .
. . . . . . 3
3. Configuration for 941 (4-way) with two 94E
expansion models .
. . . . . . . . . . 5
4. Base model (front and back views) of a Model
951 (4-way) .
. . . . . . . . . . . . 8
5. Expansion model (front and back views) of a
Model 95E .
. . . . . . . . . . . . 9
6. Expansion model configured with drives 10
7. Front view of the storage expansion enclosure 11
8. Back view of the storage expansion enclosure 12
9. Front view of the LFF storage expansion
enclosure .
. . . . . . . . . . . . 12
10. DS8000 physical footprint. Dimensions are in
centimeters (inches).
. . . . . . . . . 21
11. Adapter plug order for the DS8700 (4-port)
and the DS8800 (4-port and 8-port ) in a HA
configuration. .
. . . . . . . . . . . 31
12. Plug order for two and four DS8700 and
DS8000 I/O enclosures .
. . . . . . . . 32
13. Three-tier migration types and their processes 48
14. Remote Pair FlashCopy . . . . . . . . 59
15. Implementation of multiple-client volume
administration
. . . . . . . . . . . 66
16. Logical configuration sequence . . . . . . 69
17. Maximum tilt for a packed unit is 10° 140
18. DS8000 with top exit feature installed (cable
routing and top exit locations) .
. . . . . 144
19. Cable cutouts for a DS8000 unit. . . . . . 146
20. Cable cutouts for a DS8800 . . . . . . . 147
21. Measurements for DS8000 placement with top
exit bracket feature present .
. . . . . . 148
22. Service clearance requirements . . . . . . 153
23. Earthquake Resistance Kit, as installed on a
raised floor .
. . . . . . . . . . . 155
24. Locations for the cable cutouts and rubber
bushing holes in the raised floor and the
eyebolt installation on the concrete floor. The
pattern repeats for up to five models.
Dimensions are in millimeters (inches). .
. . 156
25. Eyebolt required dimensions. Dimensions are
in millimeters (inches).
. . . . . . . . 157
26. Earthquake Resistance Kit, as installed on a
nonraised floor. The detail shows two of the
most common fasteners that you could use. . 158
27. Locations for fastener installation (nonraised
floor). The pattern repeats for up to five
models. Dimensions are in millimeters
(inches). .
. . . . . . . . . . . . 159
28. DS8000 layouts and tile setups for cooling 170
29. DS8800 layouts and tile setup for cooling 171
© Copyright IBM Corp. 2004, 2012
vii