Important notes
Processor speed indicates the internal clock speed of the microprocessor; other
factors also affect application performance.
CD or DVD drive speed is the variable read rate. Actual speeds vary and are often
less than the possible maximum.
When referring to processor storage, real and virtual storage, or channel volume,
KB stands for 1024 bytes, MB stands for 1 048 576 bytes, and GB stands for
1 073 741 824 bytes.
When referring to hard disk drive capacity or communications volume, MB stands
for 1 000 000 bytes, and GB stands for 1 000 000 000 bytes. Total user-accessible
capacity can vary depending on operating environments.
Maximum internal hard disk drive capacities assume the replacement of any
standard hard disk drives and population of all hard disk drive bays with the
largest currently supported drives that are available from IBM.
Maximum memory might require replacement of the standard memory with an
optional memory module.
IBM makes no representation or warranties regarding non-IBM products and
services that are ServerProven
®
, including but not limited to the implied warranties
of merchantability and fitness for a particular purpose. These products are offered
and warranted solely by third parties.
IBM makes no representations or warranties with respect to non-IBM products.
Support (if any) for the non-IBM products is provided by the third party, not IBM.
Some software might differ from its retail version (if available) and might not
include user manuals or all program functionality.
Particulate contamination
Attention:
Airborne particulates (including metal flakes or particles) and reactive
gases acting alone or in combination with other environmental factors such as
humidity or temperature might pose a risk to the storage expansion enclosure that
is described in this document. Risks that are posed by the presence of excessive
particulate levels or concentrations of harmful gases include damage that might
cause the storage expansion enclosure to malfunction or cease functioning
altogether. This specification sets forth limits for particulates and gases that are
intended to avoid such damage. The limits must not be viewed or used as
definitive limits, because numerous other factors, such as temperature or moisture
content of the air, can influence the impact of particulates or environmental
corrosives and gaseous contaminant transfer. In the absence of specific limits that
are set forth in this document, you must implement practices that maintain
particulate and gas levels that are consistent with the protection of human health
and safety. If IBM determines that the levels of particulates or gases in your
environment have caused damage to the storage expansion enclosure, IBM may
condition provision of repair or replacement of storage expansion enclosure or
parts on implementation of appropriate remedial measures to mitigate such
environmental contamination. Implementation of such remedial measures is a
customer responsibility.
Notices
141
Summary of Contents for DS3950
Page 185: ......
Page 186: ...Part Number 46W6896 Printed in USA GA32 0956 04 1P P N 46W6896...
