IBM DJSA-205, Specifications, Page: 133 / 211

Reserved XXXXH 92
Current Advanced Power Management level
15– 8(=40h) Reserved
7– 0(=X) Correct Advanced Power Management level
set by Set Features Command (01h to FEh)
40XXH 91
Time required for Enhance security erase completion
0000 : Not supported
0000H 90
Time required for security erase unit completion
Time= value (XXXXh) * 2 [minutes]
XXXXH 89
Ultra DMA Transfer mode (mode 4 supported)
15–13(=0) Reserved
12(=X) 1=UltraDMA mode 4 is selected
11(=X) 1=UltraDMA mode 3 is selected
10(=X) 1=UltraDMA mode 2 is selected
9(=X) 1=UltraDMA mode 1 is selected
8(=X) 1=UltraDMA mode 0 is selected
7– 5(=0) Reserved
4(=1) 1=UltraDMA mode 4 is supported
3(=1) 1=UltraDMA mode 3 is supported
2(=1) 1=UltraDMA mode 2 is supported
1(=1) 1=UltraDMA mode 1 is supported
0(=1) 1=UltraDMA mode 0 is supported
XX1FH 88
Command set/feature enabled
15(=0) Always
14(=1) Always
13– 0(=0) Reserved
4000H 87
Command set/feature enabled
15– 8(=0) Reserved
7(=X) 1=Address Offset mode enabled
6(=0) 1=SET FEATURES subcommand required to
spin-up
5(=0) 1=Power-Up In Standby feature set has been
enabled via the SET FEATURES command
4(=0) 1=Removable Media Status Notification
Feature Set enabled
3(=X) 1=Advanced Power management
Feature Set enabled
2(=0) 1=CFA Feature Set supported
1(=0) 1=READ/WRITE DMA QUEUED command supported
0(=0) 1=DOWNLOAD MICROCODE command supported
*
*
00XXH 86
Description Content Word
Note. The ' *' mark in the 'Content' field indicates the use of those parameters that are vendor specific.
Figure 79. Identify device information (5 of 7)
Travelstar 32GH/30GT/20GN hard disk drive specifications
119