![background image](http://html1.mh-extra.com/html/ibm/dds-gen-5/dds-gen-5_user-manual_3565219014.webp)
Reviewing drive default settings
Your internal tape drive comes with various default settings. These settings are
configured using jumpers and switches.
v
The jumpers are located on the back of the drive, between the SCSI interface and
power connectors (refer to the diagram in“General installation instructions” on
page 9).
v
The switches are located on the underside of the drive. If you change a switch
setting, you must turn the drive off and then on to have the new setting take
effect (see Figure below).
You may need to change these settings to suit your requirements. Review the
default settings shown below to determine whether they suit your requirements or
need to be changed.
Parameters
Default Settings
Jumper
Pins/Switches
See...
SCSI ID
6
Jumper pins 1–2, 3–4,
5–6, 7–8
“SCSI ID settings” on
page 5
Parity checking
enabled
Jumper pins 9–10
“Parity checking” on
page 5
Terminator powered
disabled
Jumper pins 11-12
“Terminating power”
on page 5
Data compression
enabled
Switches 1 and 2
“Data compression”
on page 6
Power-On Self-Test
diagnostic
enabled
Switch 4
“Power-on self test”
on page 6
Host operating
system
Microsoft Windows
98/NT/2000/2003
Server
Switches 5-8
“Host operating
system” on page 6
Vendor ID
IBM DDS Gen5
Switch 10
“Vendor ID” on
page 7
Front of drive
Default settings shown
Switch
Default setting
1
Data compression (DC)
2
SCSI DC control
4
DDS Gen 5 Tape Drive: User’s Guide
Summary of Contents for DDS Gen 5
