IBM DCS3860, Installation, User'S, And Maintenance Manual

Page: 175 / 204

Chapter 10. Power cords
For your safety, IBM provides a power cord with a grounded attachment plug to
use with this IBM product. To avoid electrical shock, always use the power cord
and plug with a properly grounded outlet.
IBM power cords used in the United States and Canada are listed by Underwriter's
Laboratories (UL) and certified by the Canadian Standards Association (CSA).
Attention:
The DCS3860 does not support 90-136V AC sources. It supports
200-240V AC sources only. Ensure that the AC input is appropriate for the
DCS3860 before turning the power switches to the on position.
For units intended to be operated at 230 volts (U.S. use): Use a UL-listed and
CSA-certified cord set consisting of a minimum 18 AWG, Type SVT or SJT,
three-conductor cord, a maximum of 15 feet in length and a tandem blade,
grounding-type attachment plug rated 15 amperes, 250 volts.
For units intended to be operated at 230 volts (outside the U.S.): Use a cord set
with a grounding-type attachment plug. The cord set should have the appropriate
safety approvals for the country in which the equipment will be installed.
IBM power cords for a specific country or region are usually available only in that
country or region.
Table 29. IBM power cords
IBM power
cord part
number
Description Used in these countries or regions
39M5262 2.5m, 15A/250V, C19
to NEMA 6-15P Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia,
Brazil, Caicos Islands, Canada, Cayman Islands, Costa Rica, Colombia,
Cuba, Dominican Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti,
Honduras, Jamaica, Japan, Mexico, Micronesia (Federal States of),
Netherlands Antilles, Nicaragua, Panama, Peru, Philippines, Taiwan, United
States of America, Venezuela
39M5274 2.5m, 15A/250V, C19
to NEMA L6-15P Canada, Colombia, Mexico, United States
39M5547 India
39M5354 China
© Copyright IBM Corp. 2013
157