IBM DBCA-204860 - Travelstar 4.8 GB Hard Drive, Specifications

Page: 172 / 190

H The head number of the first sector to be transferred. ( L = 0 )
In LBA mode, this register contains LBA bits 24 - 27. ( L = 1 )
R The retry bit. If set to one, then retries are disabled. When write cache is enabled,
They are ignored. (Ignoring the retry bit is in violation of ATA-3.)
Input Parameters From The Device
Sector Count The number of requested sectors not transferred. This will be zero, unless an unre-
coverable error occurs.
Sector Number The sector number of the last transferred sector. ( L = 0 )
In LBA mode, this register contains current LBA bits 0 - 7. ( L = 1 )
Cylinder High/Low The cylinder number of the last transferred sector. ( L = 0 )
In LBA mode, this register contains current LBA bits 8 - 15 (Low), 16 - 23 (High).
( L = 1 )
H The head number of the last transferred sector. ( L = 0 )
In LBA mode, this register contains current LBA bits 24 - 27. ( L = 1 )
164
O E M Specifications of DBCA-2xxxxx 2.5 inch H D D