Status lights (FC 5746)
You might need to read the status lights on your tape drive to determine the operating status of the
drive. Use the information in this topic to perform this task.
The following illustration shows a front view of the tape drive:
1
Eject button
2
Ready LED
3
Fault LED
4
Single-character display (SCD)
5
SCD light
The combinations of the lights and their definitions are shown in the following table.
Table 8. Definition of Status Light Combinations
Operation
Ready
Fault
Single character
display
Response
Power-On Self-Test in
progress
Off
Off or on
Segments flashing
1
Wait 30 to 60 seconds.
After Power-On
Self-Test and drive
reset
2
3.0 seconds on
2
3.0 seconds on
2
3.0 seconds on
2
Wait 30 to 60 seconds.
No cartridge is
loaded
Off
Off or on
3
Off or C
3
Wait 30 to 60 seconds.
Cartridge is loading
or unloading
Flashing
1
Off or on
3
Off or C
3
Wait 30 to 60 seconds.
Cartridge loaded, no
activity
On
Off or on
3
Off or C
3
Wait 30 to 60 seconds.
Data cartridge
loaded, activity
Flashing
1
Off or on
3
Off or C
3
Wait 30 to 60 seconds.
Cleaning is required
(clean bit is set)
On or off
On
3
C
3
Clean drive as soon
as possible.
Cleaning in progress
Flashing
Off
C
3
Wait for cleaning to
complete.
Cleaning cartridge
loaded, clean failed
Off
On
6 or 7
4
Replace cleaning
cartridge, which may
be expired.
Figure 1. Front view of tape drive
12
Power Systems: Managing devices
Summary of Contents for Bull Escala E5-700
