IBM BNT RackSwitch G8124DC, Installation Manual

Page: 43 / 70

Installing the RackSwitch G8124
„
29
Installing the RackSwitch G8124 in a
4-post Rack
This section provides general information about installing the RackSwitch G8124 in a 4-post rack,
including the IBM e1350 - Type 1410. For information about mounting the G8124 in other rack
types, refer to the following sections:
„
“Installing the RackSwitch G8124 in a Standard Equipment Rack” on page 23
„
“Installing the RackSwitch G8124 in an iDataPlex Rack” on page 26
The 4-post mounting kit is ordered separately. The following table lists the parts included in the
standard 4-post mounting kit.
The e1350 -Type 1410 mounting kit is ordered separately. The following table lists the parts
included in the mounting kit.
Table 13 4-Post Rack Mount Kit
Item number Description Quantity
1 M6 clip nuts 8
2 M6 locking washers 8
3 M4 screws 16
4 M6 screws 8
5 M6 cage nuts 8
6 M3 screws 4
7 Front bracket 2
8 Rear bracket 2
Table 14 Type 1410 Rack Mount Kit
Item number Description Quantity
1 Left bracket 1
2 Right bracket 1
3 Filler plate 1
4 M6 screws 12
4 M6 locking washers 12
4 M6 clip nuts 8
5 M4 screws 16