IBM BladeCenter Copper Pass-thru, Installation Manual

Page: 21 / 56

Chapter 2. Installing and removing a copper pass-thru
module
Figure 3 shows the BladeCenter I/O-module bay locations.
AC
AC
DC
DC
I/O-module
bay 3
I/O-module bay 1
I/O-module bay 4
I/O-module bay 2
Attention: To maintain proper system cooling and performance, each module
bay must contain either a module or a filler module; each blade bay must
contain either a blade server, expansion unit, or a filler blade.
Figure 4 on page 8 shows the BladeCenter T I/O module locations.
Figure 3. BladeCenter I/O module bay locations
© Copyright IBM Corp. 2012
7