IBM Aptiva 2142 Hardware Maintenance Service Download Page 23

Page: 23 / 212

Trademarks

The following terms are trademarks or service marks of IBM Corporation in
the United States and other countries.

Intel and Pentium are trademarks or registered trademarks of Intel
Corporation.

Windows and the Windows NT logo are trademarks or registered trademarks
of Microsoft Corporation.

UNIX is a registered trademark in the United States and other countries
licensed exclusively through X/Open Company Limited.

Other company, product, and service names may be trademarks or service
marks of others.

Aptiva
AT
HelpCenter
IBM
Operating System/2
OS/2

Personal System/2
PS/1
PS/2
Rapid Resume
ScrollPoint
SurePath

Notices

xxi

All manuals and user guides at all-guides.com

Summary of Contents for Aptiva 2142





















































































































































































































Search results

Summary of Contents for Aptiva 2142

Reviews:

Related manuals for Aptiva 2142

Brands by name

Popular brands

IBM Aptiva 2142, Hardware Maintenance Service

Search results

Summary of Contents for Aptiva 2142

Reviews:

Related manuals for Aptiva 2142

Brands by name

Popular brands