IBM AnyPlace 4836, Planning, Installation And Service Manual

Page: 11 / 108

About this guide
This guide provides information on installing and servicing the IBM Anyplace Kiosk
and is organized as follows:
v Chapter 1, “Introducing the IBM Anyplace Kiosk,” describes the features and
available options for the 4836.
v
Chapter 2, “Installing the IBM Anyplace Kiosk” provides the installation steps for
the 4836.
v Chapter 3, “Mounting the IBM Anyplace Kiosk to the wall” describes the
procedures for mounting the 4836 to the wall.
v
Chapter 4, “Removing and replacing FRUs” provides removal and replacement
procedures for the field-replaceable parts.
v
Chapter 5, “Troubleshooting problems” describes steps for diagnosing minor
problems.
v Appendix A, “Field-replaceable units” describes the available FRU part numbers.
v
Appendix C, “Notices” provides legal, emission, and country-specific information.
v Appendix D, “Safety information” provides safety information for all common
languages.
Throughout this guide, the term 4836 and IBM 4836 refer to the IBM Anyplace
Kiosk.
Who should read this guide
Personnel responsible for installing, maintaining, and using the IBM Anyplace Kiosk
should read this guide. Some chapters provide information that is intended for
trained, technical personnel.
Related publications
The following IBM publications, drivers, and service diskette information are
available from the IBM Retail Store Solutions Web site at:
www.ibm.com/solutions/retail/store/. From the store page, click Support .
v IBM Safety Information , GA27–4004
v
IBM Anyplace Kiosk System Reference, Available only from the web.
System software, touch drivers, and diagnostics
You can obtain the drivers and diagnostic software for your Anyplace Kiosk from the
IBM Retail Store Solutions Web site:www.ibm.com/solutions/retail/store/ (from the
store page, click on Support ).
© Copyright IBM Corp. 2005
ix