IBM Advanced SerialRAID/X, Installation Manual

Page: 34 / 54

Installing the Device Driver
Note: It is assumed that you have NetWare 5 installed and running on your system
unit, and that you have already installed the IBM Advanced SerialRAID/X
Adapter in the system unit. It is also assumed that the latest service packs are
applied to the system.
This section describes how to install the device drivers. You must have either
downloaded an updated NetWare device driver from the SSA World Wide Web Support
page (http://www.hursley.ibm.com/ssa/), or have the diskette labeled Novell NetWare
5 Device Drivers that is provided with your adapter.
The following steps describe how to install the device drivers:
1. From the console of your NetWare 5 server load the install utility by entering load
nwconfig.
2. Select Driver options and press Enter
3. From the Driver options submenu select Configure disk and storage device
drivers and press Enter
4. From the Additional driver actions menu choose Select an additional driver
and press Enter.
5. The Select a driver: menu will be displayed. Press the Insert button to Install an
unlisted driver.
6. Put the NetWare driver diskette into the drive and press Enter. The system will
scan the diskette, present you with a menu of device drivers, and ask you to
Select a driver to install.
7. Select ISSAV4E0.HAM and press Enter.
8. You will be asked if you want to copy the driver ISSAV4E0.HAM. Select Yes and
press Enter.
9. You will now be asked to specify the server boot path. The default is
C:\NWSERVER. Type in the path to SERVER.EXE if it is different to the default.
Press Enter to copy the relevant files to the server.
10. When the files have been copied the Driver ISSAV4E0 Parameter Actions menu
is displayed. Choose Select/Modify driver parameters and press Enter.
11. Enter the Slot Number and press Enter.
12. Press F10 to Save parameter settings.
13. Now select Save parameters and load driver from the menu and press Enter.
The driver will be loaded.
14. You will be asked if you want to select an additional disk driver. Select No and
press Enter.
15. At the Additional driver actions menu select Return to the previous menu and
press Enter.
16. At the Driver options menu select Return to the previous menu and press
Enter.
17. At the Configuration Options menu select Exit and press Enter. Confirm exit
from the utility by selecting Yes and press Enter.
22
IBM Advanced SerialRAID/X Adapter: Installation Guide
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|