manualshive.com logo in svg

IBM 9123710 - eServer OpenPower 710, Introduction Manual

Share
Download
IBM 9123710 - eServer OpenPower 710 Introduction Manual Download Page 16

6

 

IBM eServer OpenPower 710 Technical Overview and Introduction

1.4.5  USB diskette drive

In some situations, an external USB 1.44 MB diskette drive for OpenPower 710 servers 
(FC 2591) is helpful. This lightweight USB V2 attached diskette drive takes its power 
requirements from the USB port. A USB cable is provided. The drive can be attached to the 
integrated USB ports, or to a USB adapter (FC 2738). A maximum of one USB diskette drive 
is supported per controller. The same controller can share a USB mouse and keyboard.

1.4.6  Hardware Management Console models

The Hardware Management Console is a dedicated workstation that allows you to configure 
and manage partitions. The hardware management application helps you configure and 
partition the server through a graphical user interface (GUI). 

Functions performed by the HMC includes:

򐂰

Creating and maintaining a multiple-partition environment

򐂰

Displaying a virtual operating system session terminal for each partition

򐂰

Displaying a virtual operator panel of contents for each partition

򐂰

Detecting, reporting, and storing changes in hardware conditions

򐂰

Powering managed systems on and off

򐂰

Acting as a service local point for service representatives to determine an appropriate 
service strategy

See “Hardware Management Console” on page 33 for detailed information on the HMC.

Table 1-7 lists the HMC options for POWER5 processor-based systems available at the time 
this paper was written.

Table 1-7   Supported HMC

1.5  Express Product Offerings

New specially priced Express Product Offerings are now available for the OpenPower 710 
servers. These Express Product Offerings feature popular, easy-to-order preconfigured 
servers with attractive financial incentives. Express Product Offerings are available only as an 
initial order.

OpenPower Express servers are complemented by pre-tested solutions that provide 
recommended system configurations with installation and sizing aids, for a range of business 
requirements. Built on the solid base of OpenPower servers, the Linux operating system, and 
popular application software packages, these offerings are designed to help smaller and 
mid-sized companies solve a variety of business problems—application consolidation, e-mail 
security, and infrastructure for Enterprise Resource Planning (ERP). 

Available solutions include:

򐂰

IBM

Eserver

 OpenPower Network E-Mail Security Express Solution

򐂰

IBM

Eserver

 OpenPower and IBM DB2® Universal Database for SAP Solution

Type-model

Description

7310-C04

IBM 7310 Model C04 Desktop Hardware Management Console

7310-CR3

IBM 7310 Model CR3 Rack-Mount Hardware Management Console

Summary of Contents for 9123710 - eServer OpenPower 710







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands