IBM 88743BU - System x3950 E User Manual Download Page 117

Page: 117 / 426

Chapter 3. Hardware configuration

Figure 3-8 x3850 M2 and x3950 M2: voltage regulator module and handle

17.Close the media hood, replace the cover and the bezel if you are not installing

other options.

The installation of the processor option is now finished.

3.1.3 Processor (CPU) configuration options

The BIOS includes various processor settings, which you can adjust to the
installed operating system and performance purposes.

To access the processor settings:

1. Power on or reboot the system.
2. When prompted during system startup, press

3. In the Main Menu window, select

Advanced Setup

4. Select

CPU Options

. The selection menu in Figure 3-9 on page 100 opens.

Note:

Make sure that the

Front

label on the VRM is facing the front of the

server.

Summary of Contents for 88743BU - System x3950 E











































































































































































































































































































































































































































Search results

Summary of Contents for 88743BU - System x3950 E

Reviews:

Related manuals for 88743BU - System x3950 E

Brands by name

Popular brands

IBM 88743BU - System x3950 E, User Manual

Search results

Summary of Contents for 88743BU - System x3950 E

Reviews:

Related manuals for 88743BU - System x3950 E

Brands by name

Popular brands