IBM 84H5162, Installation Manual

Page: 26 / 50

PCMCIA 33.6 Data/FAX/Voice Modem
3-4
Additional Information for Installing with Windows NT 4.0
•
After power on, open Control Panel
•
Double click Modems icon
•
Install New Modem panel should appear on your screen
•
Check don’t detect modem
•
Click NEXT
•
Insert supplied Windows95 Installation diskette in diskette drive
•
Click on OK
•
Under Models, you should see IBM 33.6 Data-Fax-Voice Modem
•
Remove diskette, click on NEXT
•
Windows NT 4.0 will request you select a com port, select any one then click
on NEXT.
•
If NT says it is unable to add modem to com port, click OK and re-run
modems from control panel but do NOT select don’t detect modem.
Windows NT 4.0 will then correctly assign the modem to a com port.
Vertifying OS/2 COM port setting
•
Open System Setup in System folder.
•
Double click on the Plug-and-play icon.
•
You should see modem configured in the slot number the modem is in.
•
To find out which COM port the modem is assigned to, select the slot and
double click on it.
•
This will display the COM port and IRQ ( interrupt ) that is assigned to the
modem.