Traps That Have a Single Flag: The following traps are associated with the hub:
¹
Control IO Status Up/Down
¹
Multiple Users
¹
Port Up/Down
¹
Ring IO Status Up/Down (8239 Model 1 only)
¹
Script
Each of these traps has an associated trap flag. The default value for each of these
flags is enabled. To change the setting, issue the ENABLE/DISABLE
TRAP_SETTING terminal interface command. To display the current setting, issue
the DISPLAY TRAP_SETTINGS terminal interface command.
If the trap is generated, viewing takes these forms:
¹
Terminal Interface: If the console_display TRAP_SETTING is enabled and the
associated flag for this trap in TRAP_SETTING is enabled, then the trap will be
displayed on the terminal interface. Otherwise, nothing will be displayed.
¹
Trap Log: The trap is put in the trap log if the associated flag for this trap in
TRAP_SETTING is enabled.
¹
8239 Model 1 LCD: Control IO Status Up Down, Data IO Status Up Down, and
Ring IO Status Up Down are displayed on the LCD, but Multiple Users and
Script are not.
¹
Sent to an SNMP Application: The trap is sent via SNMP if there is a valid
entry in the trap community table and the associated flag for this trap in
TRAP_SETTING is enabled.
The factory setting for the trap community table is null. To specify where
8239-specific traps should be sent, issue the SET TRAP_COMMUNITY
IBM8239 terminal interface command.
Traps That Have No User-Configured Flags: The following traps cannot be
disabled:
¹
Code Version Mismatch
¹
Hub Up/Down
If the trap is generated, viewing takes these forms:
¹
Terminal Interface: The trap is always displayed on the terminal interface.
¹
Trap Log: The trap is put in the trap log.
¹
8239 Model 1 LCD: Hub Up/Down and Code Version Mismatch are displayed
on the LCD.
¹
Sent to an SNMP Application: The trap is sent via SNMP if there is a valid
entry in the trap community table.
The factory setting for the trap community table is null. To specify where
8239-specific traps should be sent, issue the SET TRAP_COMMUNITY
IBM8239 terminal interface command.
7-14
8239 Setup and User’s Guide
Summary of Contents for 8239 Token-Ring Stackable Hub
