IBM 6656-HG2, Service Manual

Page: 9 / 34

Back Cover
- 9 -
DISASSEMBLY
(a)
(b)
(a)
(c)
1. TILT SWIVEL REMOVAL
(1) Remove the Cover Hinge.
(2) Remove two screws (a).
(3) Remove the Cover Piece Back.
(4) Remove two connectors (c).
(5) Remove the Module Link Cable connector.
(6) Remove the screw (b).
(7) Remove the Tilt Swivel.
2. BACK COVER REMOVAL
(1) Remove four Screw Covers (a).
(2) Remove four screws (b).
(3) Remove the Back Cover Ass’y.
(b)
(b)
(a)
(a)
(a)
(a)
(b)
(b)
3. CABINET ASS’Y REMOVAL
(1) Remove four Screws (a).
(2) Remove the Control PCB connerctor.
(3) Remove the Cabinet Ass’y.
(a)
(a)
(a)
(a)
Cover Hinge
Cover Piece Back
Module Link Cabel
Cabinet
Control PCB Connector