IBM 6339, User Manual

Page: 59 / 85

When you install an internal drive, it is important to note what type and size of
drive that you can install in each bay. Also, it is important to correctly connect the
internal drive cables to the installed drive.
Drive specifications
Your computer comes with the following IBM-installed drives:
v
A CD drive or DVD drive in bay 1 (some models)
v
A 3.5-inch diskette disk drive in bay 3
v
A 3.5-inch hard drive in bay 4
Models that do not have drives installed in bays 1 and 2 have a static shield and
bay panel installed.
The following illustration shows the locations of the drive bays.
The following table describes some of the drives you can install in each bay and
their height requirements.
1
Bay 1 - Maximum Height: 41.3 mm (1.6 in.) CD-ROM drive (standard in some models)
5.25-inch hard disk drive
2
Bay 2 - Maximum Height: 41.3 mm (1.6 in.) 5.25-inch hard disk drive
3.5-inch hard disk drive (requires a
mounting bracket)
CD-ROM drive
DVD-ROM drive
3
Bay 3 - Maximum Height: 25.4 mm (1.0 in.) 3.5-inch diskette drive (preinstalled)
4
Bay 4 - Maximum Height: 25.4 mm (1.0 in.) Hard disk drive (preinstalled)
Notes:
1. Drives that are greater than 41.3 mm (1.6 in.) high cannot be installed.
2.
Install removable media (tape or CD) drives in the accessible bays: bay 1 or 2.
48
User Guide