3
Go to the OS/2 command prompt. Type
A:\INSTALL
and press
Enter.
Follow the instructions on the screen.
4
If you are prompted for a location to install the files, select the
drive where OS/2 is installed.
5
Remove the TrackPoint Driver Diskette for OS/2 from the
diskette drive, and restart your computer to make the new
settings effective.
Installing the Infrared Device Driver for OS/2
To install the infrared device driver for OS/2:
1
Start OS/2.
2
Go to the OS/2 command prompt and install the Infrared
Features Diskette II into the diskette drive.
3
Type as follows and press Enter.
A:\INSTALL2 /S:A:\ /T:x:tgt_dir /B:y
where
x
is the target drive,
tgt_dir
is the target directory, and
y
is the boot drive where CONFIG.SYS resides.
Installing the Display Driver for OS/2
The display driver enables you to use various screen resolutions and
colors for the LCD and external monitor. The display driver also
takes advantage of the computer's video capability.
To install the ThinkPad display driver for OS/2:
1
Start OS/2.
2
Insert the Video Features Diskette (NM2200) for OS/2 into the
diskette drive:
3
Open the OS/2 full screen or OS/2 window and go to the A:
prompt.
|
4
Type
SETUP X
(X=boot drive) and press Enter.
Chapter 8. Installing Software
153
Summary of Contents for 600E - ThinkPad 2645 - PII 400 MHz
