Important
During installation, do the following so that Windows can operate
correctly:
When the Windows Setup program asks you to select either
Express Setup or Custom Setup, select
C
for Custom
Setup.
Install Windows 3.1 with the default VGA display driver that
came with Windows. After you complete the installation of
Windows, install the ThinkPad display driver.
|
If you have installed more than 256 MB of memory, check the
|
[386Enh]
section of the SYSTEM.INI file and do one of the
|
following:
|
– If the
PageOverCommit
line is in the file, make sure its
|
value is 3. (If not, change it to 3.)
|
– If the
PageOverCommit
line is not in the file, add
|
PageOverCommit=3
|
Note:
The
PageOverCommit
value could be 2 or 1.
|
After you change or add the value, shut down Windows 3.1
|
and power off the computer; then power it on again after 5
|
seconds.
|
For more information on the
PageOverCommit
value see the
|
Windows 3.1 manuals.
Do the following to install Windows 3.1:
1
Start the installation as specified in the Windows manual.
2
When the Windows Setup program asks you to select Express
Setup or Custom Setup, type
C
for Custom Setup.
3
Continue installing Windows 3.1 until the following window
appears:
142
IBM ThinkPad 600E Online Book
Summary of Contents for 600E - ThinkPad 2645 - PII 400 MHz
