![background image](http://html1.mh-extra.com/html/ibm/6-mpls/6-mpls_user-manual_609090011.webp)
Specialized Models User Guide
6
MPLS Model User Guide
Modeler/Release 10.0
SPM-6-11
LSP Browser
After you create the LSPs in the network, you may want to edit or view the
default settings. You do this in the LSP browser, which you can access from the
Protocols > MPLS > Browse/Edit LSP Information... menu item. The browser
enables you to
•
Set the hop type of LERs
•
Set the start and end times for the LSP
•
Set threshold values for bandwidth, delay, and hop counts in the LSP
•
Hide some or all of the LSPs from view in the Project Editor workspace
•
Export LSP configuration details to a file
Figure 6-13 Using the LSP Browser
These attributes set the
LSP’s Path Details and
Setup, TE, and Recovery
Parameters attributes.
Clicking here toggles the display
settings—the workspace is immediately
refreshed to show or hide the LSPs.
Clicking OK saves the current settings in
the LSP specification file or creates this
file if one does not yet exist.
This column indicates if the
attribute values shown are
from the GUI or the LSP
specification file.