IBM 5104-22C, Installing And Configuring

Page: 109 / 148

Figure 59. Removing the PCIe riser
a) Remove the screw (A) and retract the retaining pin (B).
b) Lift the PCIe riser from the system.
c) Place the PCIe adapter riser on an ESD surface.
d) Remove the screw and the tail-stock filler for that position.
e) If you are inserting a storage drive adapter, connect the signal cables to the adapter before
inserting the adapter.
See “Drive installation options for the 9006-22P system” on page 9 for cabling information.
f) Plug the adapter (A) into the proper slot in the PCIe adapter riser (B) as shown in Figure 60 on page
96.
Installing and configuring your system and system features 95